Clemson University Facilities (2019-SC-73327)

On-the-job Training

• Medium Voltage
  • Level I - Demonstrate knowledge of the various components of the medium voltage distribution system including transformers, padmount switchgear, underground distribution systems, overhead lines, and switching stations.
  • Level II - Assist with the installation and repair of the campus primary electrical distribution systems (12470V/4160V) including padmount transformers, padmount switchgear, underground distribution systems, and switching stations.
  • Level II - Assist with predictive and preventive maintenance, repair and construction of overhead lines and poles, circuit switching equipment, fuses, and pole mount transformers.
  • Level III - Perform predictive and preventive maintenance, repair and construction associated with campus primary electrical distribution systems (12470V/4160V) including transformers, padmount switchgear, underground distribution systems, and switching s
  • Level III - Perform predictive and preventive maintenance, repair and construction of overhead lines and poles, circuit switching equipment, fuses, and pole mount transformers with limited supervision.
• Electrical Construction
  • Level I - Assist with the layout and installation of electrical conduit systems consisting of rigid steel, electrical metal tubing, non-metallic conduit (PVC) and concrete encased ductbank.
  • Level II - Layout and install electrical conduit systems consisting of rigid steel, electrical metallic tubing, non-metallic conduit (PVC) and concrete encased ductbank with supervision.
  • Level III - Layout and install electrical conduit systems consisting of rigid steel, electrical metal tubing, non-metallic conduit (PVC) and concrete encased ductbank with limited supervision.
  • Level III - Installation of campus site lighting and systems including walkways, streets, parking lots and other outdoor areas with limited supervision.
  • Level II - Assist with the layout and installation of overhead distribution systems consisting of wood pole, cross-arms, insulators, guy wires, conductors, fuses, and surge arrestors.
  • Level III - Layout and install overhead distribution systems consisting of wood pole, cross-arms, insulators, guy wires, conductors, fuses, and surge arrestors with supervision.
• Electrical Systems Maintenance
  • Level I - Assist with the maintenance, repair, and replacement of electrical equipment and apparatus including single and three phase motors, starters, fused and non-fused disconnect switches, panelboards, switchgear, and circuit breakers.
  • Level I - Assist with the maintenance, repair, and replacement of outdoor campus lighting systems including pole mounted light fixtures, photocells, poles, bases and wiring.
  • Level I - Assist with traffic safety and temporary traffic control for work in and along campus roadways.
  • Level II - Read, understand plans/specifications, and apply them to work in the field.
  • Level II - Perform maintenance, repair, replacement of electrical equipment and apparatus including single and three phase motors, starters, fused and non-fused disconnect switches, panelboards, switchgear, and circuit breakers with supervision.
  • Level II - Perform maintenance and repair of outdoor campus lighting systems including pole mounted light fixtures, photocells, poles, bases and wiring with supervision.
  • Level II - Assist with troubleshooting and repair of traffic signal equipment including pedestrian push buttons, signal heads, detection systems, and control cabinets.
  • Level III - Perform maintenance, repair, replacement of traffic signal equipment including pedestrian push buttons, signal heads, detection systems, and control cabinets with supervision.
  • Level III - Perform maintenance and repair of outdoor campus lighting systems including pole mounted light fixtures, photocells, poles, bases and wiring with limited supervision
• Codes and Regulations
  • Level I - Demonstrate basic knowledge of topics covered in the National Electrical Code (NEC).
  • Level I - Demonstrate basic knowledge of topics covered in the NFPA 70E.
  • Level II - Demonstrate ability to apply National Electrical Code (NEC) requirements to applicable field work on cable protection and equipment grounding.
  • Level II - Demonstrate ability to apply NFPA 70E guidelines for Arc Flash safety.
  • Level II - Demonstrate basic knowledge of topics covered in the National Electrical Safety Code (NESC).
  • Level III - Demonstrate ability to apply National Electrical Safety Code (NESC) requirements to applicable field work for overhead line clearances.
• General Duties
  • Ensures work is performed in compliance with safety, building, fire, hazardous and other applicable codes, and regulations.
  • Knowledge of AIM or comparable Work Order Tracking System and ability to enter data as needed.
  • Works and communicates well with supervisor, customer, and coworkers.
  • Cross-trains in Electrical Maintenance.